Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093367417, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB/HB, Feed direction: with drilling

Tehnilised andmed

EAN: 4031093367417
Type: N
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HB/HB
Number of cutting edges range (from/to): 4

Mõõtmed ja tellimiskoodid

Tellimiskood	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saadavus
3050 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Tellimisel
3050 18.000	48.56 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Tellimisel
3050 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Tellimisel
3050 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Tellimisel
3050 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Tellimisel
3050 4.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Tellimisel
3050 5.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Tellimisel
3050 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Tellimisel
3050 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Tellimisel
3050 14.000	38.88 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Tellimisel
3050 3.000	11.00 mm	47.30 mm	57.00 mm	6.00 mm	3.00 mm	Tellimisel