← Kataloog
Suurendamiseks liigutage kursor pildile
3014
Ball nose slot drill XL (2-fluted)
Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4031093364744, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
Tehnilised andmed
- EAN
- 4031093364744
- Type
- N
- Surface
- bright
- Designation
- Ball nose slot drill XL (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.000 mm – 12.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
Mõõtmed ja tellimiskoodid
| Tellimiskood | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Saadavus | Küsi hinda |
|---|---|---|---|---|---|---|---|
| 3014 8.000 | 52.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Tellimisel | |
| 3014 5.000 | 38.00 mm | 28.00 mm | 75.00 mm | 5.00 mm | 5.00 mm | Tellimisel | |
| 3014 10.000 | 54.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Tellimisel | |
| 3014 4.000 | 31.40 mm | 28.00 mm | 75.00 mm | 4.00 mm | 4.00 mm | Tellimisel | |
| 3014 6.000 | 39.60 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Tellimisel | |
| 3014 3.000 | 23.75 mm | 28.00 mm | 75.00 mm | 3.00 mm | 3.00 mm | Tellimisel | |
| 3014 12.000 | 61.80 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Tellimisel |