← Kataloog
Suurendamiseks liigutage kursor pildile
3716
Hard multi-tooth end mill GH 100 H
Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093676786, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: extra long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA
Tehnilised andmed
- EAN
- 4031093676786
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill GH 100 H
- Helix angle
- 55
- Diameter range
- 6.000 mm – 20.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6-8
Mõõtmed ja tellimiskoodid
| Tellimiskood | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Saadavus | Küsi hinda |
|---|---|---|---|---|---|---|---|
| 3716 16.000 | 72.00 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | Tellimisel | |
| 3716 12.000 | 51.00 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Tellimisel | |
| 3716 20.000 | 73.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | Tellimisel | |
| 3716 10.000 | 46.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Tellimisel | |
| 3716 8.000 | 45.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Tellimisel | |
| 3716 6.000 | 35.00 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Tellimisel |