← Kataloog
Suurendamiseks liigutage kursor pildile
5729
Multi-tooth end mill GH 100 U
Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093684965, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: extra long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA, Corner design: Schneidecke 90°
Tehnilised andmed
- EAN
- 4031093684965
- Type
- N
- Designation
- Multi-tooth end mill GH 100 U
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 6.000 mm – 20.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6-8
Mõõtmed ja tellimiskoodid
| Tellimiskood | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Saadavus | Küsi hinda |
|---|---|---|---|---|---|---|---|
| 5729 16.000 | 71.40 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | Tellimisel | |
| 5729 6.000 | 32.40 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Tellimisel | |
| 5729 10.000 | 44.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Tellimisel | |
| 5729 20.000 | 71.60 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | Tellimisel | |
| 5729 8.000 | 43.20 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Tellimisel | |
| 5729 12.000 | 49.80 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Tellimisel |