← Kataloog
Suurendamiseks liigutage kursor pildile
6898
Ratio milling cutter RS 100 U
Ratio milling cutter RS 100 U. Designation: Ratio milling cutter RS 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844283428, Cutting material: Solid carbide, Product family: RS 100 U, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4-5, Feed direction: with drilling
Tehnilised andmed
- EAN
- 4049844283428
- Type
- N
- Designation
- Ratio milling cutter RS 100 U
- Helix angle
- 30
- Diameter range
- 6.350 mm – 25.400 mm
- Feed direction
- with drilling
- Product family
- RS 100 U
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 4-5
Mõõtmed ja tellimiskoodid
| Tellimiskood | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Saadavus | Küsi hinda |
|---|---|---|---|---|---|---|---|
| 6898 19.050 | 52.50 mm | 49.10 mm | 101.60 mm | 19.05 mm | 19.05 mm | Tellimisel | |
| 6898 7.940 | 26.50 mm | 37.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Tellimisel | |
| 6898 12.700 | 33.50 mm | 42.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | Tellimisel | |
| 6898 15.870 | 41.00 mm | 47.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | Tellimisel | |
| 6898 25.400 | 57.00 mm | 44.60 mm | 101.60 mm | 25.40 mm | 25.40 mm | Tellimisel | |
| 6898 6.350 | 25.00 mm | 38.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | Tellimisel | |
| 6898 9.520 | 28.00 mm | 35.50 mm | 63.50 mm | 9.53 mm | 9.53 mm | Tellimisel |