Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093377232, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°

Tehnilised andmed

EAN: 4031093377232
Type: N
Surface: bright
Designation: Roughing/finishing end mills
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 6.000 mm – 36.000 mm
Back rake angle: 11
Cutting material: M42
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: B
Number of cutting edges range (from/to): 4-6

Mõõtmed ja tellimiskoodid

Tellimiskood	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saadavus
3342 20.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Tellimisel
3342 8.000	42.00 mm	40.00 mm	88.00 mm	10.00 mm	8.00 mm	Tellimisel
3342 28.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	28.00 mm	Tellimisel
3342 14.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	14.00 mm	Tellimisel
3342 32.000	115.00 mm	60.00 mm	186.00 mm	32.00 mm	32.00 mm	Tellimisel
3342 10.000	49.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	Tellimisel
3342 22.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	22.00 mm	Tellimisel
3342 18.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	18.00 mm	Tellimisel
3342 16.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	Tellimisel
3342 12.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	Tellimisel
3342 6.000	27.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Tellimisel
3342 25.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	25.00 mm	Tellimisel