← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
6174
90° Chamfering milling cutter
90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4069941477834, Indicator new/addition: New, Cutting material: Solid carbide, Surface: TiAlN, Standard: Company std., Cutting direction: Right-hand, Type of machine interface: Cyl
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4069941477834
- Surface
- TiAlN
- Standard
- Company std.
- Designation
- 90° Chamfering milling cutter
- Diameter range
- 1.590 mm – 19.050 mm
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Indicator new/addition
- New
- Type of machine interface
- Cyl
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|---|
| 6174 15.870 | 15.88 mm | 48.40 mm | 76.20 mm | 15.88 mm | 15.88 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 3.170 | 3.02 mm | 24.00 mm | 38.10 mm | 3.17 mm | 3.17 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 6.350 | 6.35 mm | 35.00 mm | 50.80 mm | 6.35 mm | 6.35 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 19.050 | 19.05 mm | 51.60 mm | 76.20 mm | 19.05 mm | 19.05 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 9.520 | 9.53 mm | 36.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 4.760 | 4.76 mm | 28.00 mm | 38.10 mm | 4.76 mm | 4.76 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 1.590 | 1.51 mm | 29.60 mm | 38.10 mm | 3.17 mm | 1.59 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 7.940 | 7.94 mm | 36.00 mm | 50.80 mm | 7.94 mm | 7.94 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 6174 12.700 | 12.70 mm | 45.20 mm | 63.50 mm | 12.70 mm | 12.70 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |