← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
3011
Al slot drill XL (2-fluted)
Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093364485, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4031093364485
- Type
- N
- Surface
- bright
- Designation
- Al slot drill XL (2-fluted)
- Helix angle
- 30
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 2
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|---|
| 3011 6.000 | 37.00 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 8.000 | 48.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 3.000 | 24.00 mm | 28.00 mm | 75.00 mm | 3.00 mm | 3.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 14.000 | 59.00 mm | 45.00 mm | 150.00 mm | 14.00 mm | 14.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 18.000 | 82.00 mm | 48.00 mm | 150.00 mm | 18.00 mm | 18.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 14.001 | 79.00 mm | 48.00 mm | 150.00 mm | 16.00 mm | 14.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 20.000 | 84.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 12.000 | 58.00 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 4.000 | 29.50 mm | 28.00 mm | 75.00 mm | 4.00 mm | 4.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 5.000 | 35.50 mm | 28.00 mm | 75.00 mm | 5.00 mm | 5.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 16.000 | 81.00 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 18.001 | 82.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 18.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3011 10.000 | 50.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |