← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
582
Centre drills without flat
Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093182201, Cutting material: HSS, Surface: bright, Type: N, Standard: DIN 333, Point angle: 118, Cutting direction: Left-hand, Form: A
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4031093182201
- Form
- A
- Type
- N
- Surface
- bright
- Standard
- DIN 333
- Designation
- Centre drills without flat
- Point angle
- 118
- Diameter range
- 0.500 mm – 12.500 mm
- Cutting material
- HSS
- Cutting direction
- Left-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Total length | Shank diameter | Nominal diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|
| 582 2.500 | 14.00 mm | 45.00 mm | 6.30 mm | 2.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 1.250 | 7.00 mm | 31.50 mm | 3.15 mm | 1.25 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 1.000 | 7.00 mm | 31.50 mm | 3.15 mm | 1.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 6.300 | 26.00 mm | 71.00 mm | 16.00 mm | 6.30 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 0.800 | 7.00 mm | 25.00 mm | 3.15 mm | 0.80 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 1.600 | 8.50 mm | 35.50 mm | 4.00 mm | 1.60 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 2.000 | 10.50 mm | 40.00 mm | 5.00 mm | 2.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 8.000 | 32.00 mm | 80.00 mm | 20.00 mm | 8.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 5.000 | 23.00 mm | 63.00 mm | 12.50 mm | 5.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 12.500 | 50.00 mm | 125.00 mm | 31.50 mm | 12.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 0.500 | 7.00 mm | 25.00 mm | 3.15 mm | 0.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 10.000 | 40.00 mm | 100.00 mm | 25.00 mm | 10.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 4.000 | 19.00 mm | 56.00 mm | 10.00 mm | 4.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 582 3.150 | 16.00 mm | 50.00 mm | 8.00 mm | 3.15 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |