← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
3093
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093761932, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: short, Number of cutting edges range (from/to): 4, Feed direction: with drilling
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4031093761932
- Type
- N
- Designation
- End mill (4-fluted)
- Helix angle
- 30
- Diameter range
- 1.590 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- short
- Number of cutting edges range (from/to)
- 4
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|---|
| 3093 1.590 | 4.79 mm | 44.00 mm | 50.80 mm | 3.17 mm | 1.59 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 9.520 | 25.52 mm | 25.27 mm | 50.80 mm | 9.53 mm | 9.53 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 15.870 | 33.60 mm | 42.59 mm | 76.20 mm | 15.88 mm | 15.88 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 11.110 | 26.22 mm | 37.28 mm | 63.50 mm | 11.11 mm | 11.11 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 7.940 | 20.64 mm | 30.16 mm | 50.80 mm | 7.94 mm | 7.94 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 12.700 | 27.68 mm | 35.82 mm | 63.50 mm | 12.70 mm | 12.70 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 6.350 | 19.05 mm | 31.75 mm | 50.80 mm | 6.35 mm | 6.35 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 4.760 | 14.26 mm | 36.54 mm | 50.80 mm | 4.76 mm | 4.76 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 19.050 | 43.03 mm | 33.17 mm | 76.20 mm | 19.05 mm | 19.05 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3093 3.170 | 9.68 mm | 41.13 mm | 50.80 mm | 3.17 mm | 3.17 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |