← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
9024
End mill (4-fluted)
End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844813588, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Perrox, Type: H, Helix angle: 38, Back rake angle: 9, Number of cutting edges range (from/to): 4, Type of machine interface: Cyl
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4049844813588
- Type
- H
- Surface
- Perrox
- Designation
- End mill (4-fluted)
- Helix angle
- 38
- Diameter range
- 0.500 mm – 2.000 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Indicator new/addition
- New
- Type of machine interface
- Cyl
- Number of cutting edges range (from/to)
- 4
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|---|
| 9024 0.500 | 0.90 mm | 41.50 mm | 47.00 mm | 3.00 mm | 0.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 9024 1.501 | 2.70 mm | 29.50 mm | 47.00 mm | 3.00 mm | 1.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 9024 2.000 | 3.40 mm | 34.90 mm | 47.00 mm | 3.00 mm | 2.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 9024 2.001 | 3.40 mm | 29.90 mm | 47.00 mm | 3.00 mm | 2.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 9024 1.500 | 2.70 mm | 37.00 mm | 47.00 mm | 3.00 mm | 1.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |