Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844099432, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 30/29/31, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HA/~HB, Feed direction: with drilling

ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ

EAN: 4049844099432
Type: W
Surface: bright
Designation: Ratio end mill RF 100 AL
Helix angle: 30/29/31
Diameter range: 6.350 mm – 25.400 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 8
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 3

ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ

ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ⵜⵉⵍⵉⵜ
4266 6.350	27.00 mm	36.50 mm	63.50 mm	6.35 mm	6.35 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 12.700	46.00 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 9.520	35.50 mm	28.00 mm	63.50 mm	9.53 mm	9.53 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 15.870	48.00 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 19.050	57.00 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 25.400	59.00 mm	58.00 mm	101.60 mm	25.40 mm	25.40 mm	ⵖⴼ ⵜⵓⵜⵔⴰ
4266 7.940	28.50 mm	35.00 mm	63.50 mm	7.94 mm	7.94 mm	ⵖⴼ ⵜⵓⵜⵔⴰ