← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
981
Set Hand taps for UNC-threads
Set Hand taps for UNC-threads. Designation: Set Hand taps for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093270939, Cutting material: HSS, Surface: bright, Type: N, Tolerance class thread: 2B, Cutting direction: Right-hand, Hole type: Through-hole, blind hole drilling
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4031093270939
- Type
- N
- Surface
- bright
- Hole type
- Through-hole, blind hole drilling
- Designation
- Set Hand taps for UNC-threads
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Tolerance class thread
- 2B
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Shank diameter | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|
| 981 3.505 | 16.00 mm | 4.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 2.184 | 4.00 mm | 2.80 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 5.486 | 23.00 mm | 6.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 2.515 | 4.00 mm | 2.80 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 4.826 | 20.00 mm | 6.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 2.845 | 14.00 mm | 3.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 1.854 | 5.50 mm | 2.80 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 4.166 | 17.00 mm | 4.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 12.700 | 36.00 mm | 9.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 25.400 | 56.00 mm | 18.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 3.175 | 14.00 mm | 3.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 50.800 | 95.00 mm | 40.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 22.225 | 46.00 mm | 18.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 9.525 | 32.00 mm | 7.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 7.938 | 28.00 mm | 6.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 19.050 | 46.00 mm | 14.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 11.113 | 32.00 mm | 8.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 6.350 | 23.00 mm | 6.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 14.288 | 38.00 mm | 11.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 981 15.875 | 41.00 mm | 12.00 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |