← ⴰⴽⴰⵜⴰⵍⵓⴳ
ⵙⵙⵔⵙ ⵜⴰⵎⵙⵙⵉⵔⵜ ⵖⴼ ⵜⵡⵍⴰⴼⵜ ⵉ ⵓⵙⵉⵎⵖⵓⵔ
3187
Shell end mill
Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 160.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093369619, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Corner design: Schneidecke 90°, Feed direction: lateral
ⵜⵉⴼⵔⵉⵙⵉⵏ ⵜⵉⵜⵉⴽⵏⵉⴽⵉⵢⵉⵏ
- EAN
- 4031093369619
- Type
- N
- Surface
- bright
- Designation
- Shell end mill
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 40.000 mm – 160.000 mm
- Feed direction
- lateral
- Back rake angle
- 11
- Cutting material
- M42
- Internal diameter
- 16.00 mm
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
ⵜⵉⴷⴷⵉⵡⵉⵏ ⴷ ⵜⵏⴳⴰⵍⵉⵏ ⵏ ⵓⵙⵓⵜⵔ
| ⵜⴰⵏⴳⴰⵍⵜ ⵏ ⵓⵙⵓⵜⵔ | Flute length | Total length | Nominal diameter | Shank length | ⵜⵉⵍⵉⵜ | ⵙⵓⵜⵔ ⴰⵜⵉⴳ |
|---|---|---|---|---|---|---|
| 3187 40.000 | 32.00 mm | 32.00 mm | 40.00 mm | — | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3187 50.000 | 36.00 mm | 36.00 mm | 50.00 mm | — | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3187 100.000 | 49.50 mm | 50.00 mm | 100.00 mm | 0.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3187 80.000 | 44.50 mm | 45.00 mm | 80.00 mm | 0.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3187 63.000 | 40.00 mm | 40.00 mm | 63.00 mm | — | ⵖⴼ ⵜⵓⵜⵔⴰ | |
| 3187 125.000 | 55.50 mm | 56.00 mm | 125.00 mm | 0.50 mm | ⵖⴼ ⵜⵓⵜⵔⴰ |