← ካታሎግ
ንምዕባይ ኣብቲ ምስሊ ኣንሳፍፍ
8138
End mill (single-fluted)
End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844767324, Cutting material: Solid carbide, Surface: Carbo, Helix angle: 30, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 1, Type of machine interface: ~HA/HA, Corner design: Schneidecke 90°, Feed direction: with drilling
ቴክኒካዊ መግለጺታት
- EAN
- 4049844767324
- Surface
- Carbo
- Designation
- End mill (single-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 2.000 mm – 16.000 mm
- Feed direction
- with drilling
- Back rake angle
- 25
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 1
ዓቐናትን ናይ ትእዛዝ ኮዳትን
| ናይ ትእዛዝ ኮድ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ኣብ ስቶክ ምርካቡ | ዋጋ ሕተት |
|---|---|---|---|---|---|---|---|
| 8138 6.000 | 26.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | ብሕቶ | |
| 8138 5.000 | 21.00 mm | 28.00 mm | 50.00 mm | 5.00 mm | 5.00 mm | ብሕቶ | |
| 8138 2.000 | 15.00 mm | 28.00 mm | 38.00 mm | 2.00 mm | 2.00 mm | ብሕቶ | |
| 8138 10.000 | 34.00 mm | 40.00 mm | 73.00 mm | 10.00 mm | 10.00 mm | ብሕቶ | |
| 8138 16.000 | 48.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | ብሕቶ | |
| 8138 8.000 | 30.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | ብሕቶ | |
| 8138 12.000 | 40.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | ብሕቶ | |
| 8138 3.000 | 17.00 mm | 27.00 mm | 39.00 mm | 3.00 mm | 3.00 mm | ብሕቶ | |
| 8138 4.000 | 20.00 mm | 25.00 mm | 40.00 mm | 4.00 mm | 4.00 mm | ብሕቶ |