← ካታሎግ
ንምዕባይ ኣብቲ ምስሊ ኣንሳፍፍ
6946
Finishing end mill G-Mold 65 F
Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844500884, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: extra long, Number of cutting edges range (from/to): 6, Type of machine interface: ~HA/HA
ቴክኒካዊ መግለጺታት
- EAN
- 4049844500884
- Type
- H
- Surface
- Signum
- Designation
- Finishing end mill G-Mold 65 F
- Helix angle
- 42
- Diameter range
- 3.000 mm – 20.000 mm
- Back rake angle
- -3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Type of machine interface
- ~HA/HA
- Number of cutting edges range (from/to)
- 6
ዓቐናትን ናይ ትእዛዝ ኮዳትን
| ናይ ትእዛዝ ኮድ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ኣብ ስቶክ ምርካቡ | ዋጋ ሕተት |
|---|---|---|---|---|---|---|---|
| 6946 20.000 | 71.00 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | ብሕቶ | |
| 6946 6.000 | 23.90 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | ብሕቶ | |
| 6946 10.000 | 35.50 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | ብሕቶ | |
| 6946 5.000 | 20.25 mm | 36.00 mm | 75.00 mm | 6.00 mm | 5.00 mm | ብሕቶ | |
| 6946 12.000 | 41.40 mm | 45.00 mm | 114.00 mm | 12.00 mm | 12.00 mm | ብሕቶ | |
| 6946 16.000 | 59.20 mm | 48.00 mm | 125.00 mm | 16.00 mm | 16.00 mm | ብሕቶ | |
| 6946 8.000 | 31.60 mm | 36.00 mm | 90.00 mm | 8.00 mm | 8.00 mm | ብሕቶ | |
| 6946 4.000 | 16.60 mm | 36.00 mm | 65.00 mm | 6.00 mm | 4.00 mm | ብሕቶ | |
| 6946 14.000 | 48.30 mm | 45.00 mm | 100.00 mm | 14.00 mm | 14.00 mm | ብሕቶ | |
| 6946 3.000 | 12.95 mm | 39.70 mm | 65.00 mm | 6.00 mm | 3.00 mm | ብሕቶ |