← ካታሎግ
ንምዕባይ ኣብቲ ምስሊ ኣንሳፍፍ
3363
Hard multi-tooth end mill corner radius GH 100 H
Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093675543, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: extra long, Number of cutting edges range (from/to): 6, Type of machine interface: HA
ቴክኒካዊ መግለጺታት
- EAN
- 4031093675543
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill corner radius GH 100 H
- Helix angle
- 55
- Diameter range
- 6.000 mm – 16.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6
ዓቐናትን ናይ ትእዛዝ ኮዳትን
| ናይ ትእዛዝ ኮድ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ኣብ ስቶክ ምርካቡ | ዋጋ ሕተት |
|---|---|---|---|---|---|---|---|
| 3363 8.000 | 24.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | ብሕቶ | |
| 3363 6.000 | 18.00 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | ብሕቶ | |
| 3363 10.000 | 28.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | ብሕቶ | |
| 3363 16.000 | 39.00 mm | 48.00 mm | 150.00 mm | 16.00 mm | 16.00 mm | ብሕቶ | |
| 3363 12.000 | 32.00 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | ብሕቶ |