← ካታሎግ
ንምዕባይ ኣብቲ ምስሊ ኣንሳፍፍ
3190
Hard roughing end mill GS 100 H (fine teeth)
Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093665643, Cutting material: Solid carbide, Type: H, Helix angle: 20, Back rake angle: 3, Length picto milling: extra long, Number of cutting edges range (from/to): 4
ቴክኒካዊ መግለጺታት
- EAN
- 4031093665643
- Type
- H
- Designation
- Hard roughing end mill GS 100 H (fine teeth)
- Helix angle
- 20
- Diameter range
- 6.350 mm – 19.050 mm
- Back rake angle
- 3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 4
ዓቐናትን ናይ ትእዛዝ ኮዳትን
| ናይ ትእዛዝ ኮድ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | ኣብ ስቶክ ምርካቡ | ዋጋ ሕተት |
|---|---|---|---|---|---|---|---|
| 3190 7.940 | 24.50 mm | 38.10 mm | 76.20 mm | 7.94 mm | 7.94 mm | ብሕቶ | |
| 3190 12.700 | 33.50 mm | 44.45 mm | 114.30 mm | 12.70 mm | 12.70 mm | ብሕቶ | |
| 3190 19.050 | 48.00 mm | 50.80 mm | 127.00 mm | 19.05 mm | 19.05 mm | ብሕቶ | |
| 3190 6.350 | 23.00 mm | 38.10 mm | 76.20 mm | 6.35 mm | 6.35 mm | ብሕቶ | |
| 3190 9.520 | 31.50 mm | 38.10 mm | 76.20 mm | 9.53 mm | 9.53 mm | ብሕቶ | |
| 3190 15.870 | 40.00 mm | 50.80 mm | 127.00 mm | 15.88 mm | 15.88 mm | ብሕቶ |