End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4069941022645, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Cristall M, Product family: CR 200, Helix angle: 5, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Feed direction: with drilling

ቴክኒካዊ መግለጫዎች

EAN: 4069941022645
Surface: Cristall M
Designation: End mill CR 200 for fibre-reinforced plastics
Helix angle: 5
Diameter range: 4.000 mm – 12.700 mm
Feed direction: with drilling
Product family: CR 200
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Indicator new/addition: New
Number of cutting edges range (from/to): 6-8

ልኬቶች እና የማዘዣ ኮዶች

የማዘዣ ኮድ	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	ተገኝነት
6930 12.000	45.01 mm	45.00 mm	93.00 mm	12.00 mm	12.00 mm	በጥያቄ መሠረት
6930 10.000	41.83 mm	40.00 mm	85.00 mm	10.00 mm	10.00 mm	በጥያቄ መሠረት
6930 4.000	20.90 mm	36.00 mm	66.00 mm	6.00 mm	4.00 mm	በጥያቄ መሠረት
6930 8.000	36.05 mm	36.00 mm	75.00 mm	8.00 mm	8.00 mm	በጥያቄ መሠረት
6930 6.000	28.16 mm	36.00 mm	70.00 mm	6.00 mm	6.00 mm	በጥያቄ መሠረት
6930 9.525	37.50 mm	36.00 mm	76.00 mm	9.53 mm	9.53 mm	በጥያቄ መሠረት
6930 6.350	28.81 mm	35.00 mm	70.00 mm	6.35 mm	6.35 mm	በጥያቄ መሠረት
6930 4.762	21.10 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	በጥያቄ መሠረት
6930 12.700	40.50 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	በጥያቄ መሠረት