Finishing end mill G-Mold 65 F

Finishing end mill G-Mold 65 F. Designation: Finishing end mill G-Mold 65 F, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844497795, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 42, Back rake angle: -3, Length picto milling: long, Number of cutting edges range (from/to): 6, Type of machine interface: ~HA/HA

Tekniset tiedot

EAN: 4049844497795
Type: H
Surface: Signum
Designation: Finishing end mill G-Mold 65 F
Helix angle: 42
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: -3
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 6

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
6945 20.000	47.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Pyynnöstä
6945 16.000	39.20 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Pyynnöstä
6945 6.000	16.90 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Pyynnöstä
6945 4.000	13.60 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Pyynnöstä
6945 10.000	26.50 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Pyynnöstä
6945 12.000	31.40 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Pyynnöstä
6945 8.000	22.60 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Pyynnöstä
6945 5.000	16.25 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Pyynnöstä
6945 14.000	32.30 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Pyynnöstä
6945 3.000	9.95 mm	40.70 mm	57.00 mm	6.00 mm	3.00 mm	Pyynnöstä