HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394773, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Tekniset tiedot

EAN: 4049844394773
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
19941 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Pyynnöstä
19941 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Pyynnöstä
19941 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Pyynnöstä
19941 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Pyynnöstä
19941 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Pyynnöstä
19941 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Pyynnöstä
19941 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Pyynnöstä
19941 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Pyynnöstä
19941 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Pyynnöstä
19941 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Pyynnöstä