Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.570 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093243421, Cutting material: Solid carbide, Surface: bright, Product family: GS 200 G, Drilling depth: 5xD, Standard: DIN 6539, Point angle: 150, Tolerance class nominal diameter: h7, Cutting direction: Right-hand

Tekniset tiedot

EAN: 4031093243421
Surface: bright
Standard: DIN 6539
Designation: Ratio drill without coolant ducts, 3-fluted
Point angle: 150
Diameter range: 3.570 mm – 19.050 mm
Drilling depth: 5xD
Product family: GS 200 G
Cutting material: Solid carbide
Cutting direction: Right-hand
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Tolerance class nominal diameter: h7

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
745 13.400	66.00 mm	41.00 mm	107.00 mm	13.40 mm	13.40 mm	Pyynnöstä
745 6.900	45.00 mm	29.00 mm	74.00 mm	6.90 mm	6.90 mm	Pyynnöstä
745 7.600	48.00 mm	31.00 mm	79.00 mm	7.60 mm	7.60 mm	Pyynnöstä
745 8.800	52.00 mm	32.00 mm	84.00 mm	8.80 mm	8.80 mm	Pyynnöstä
745 12.500	65.00 mm	37.00 mm	102.00 mm	12.50 mm	12.50 mm	Pyynnöstä
745 8.330	48.00 mm	31.00 mm	79.00 mm	8.33 mm	8.33 mm	Pyynnöstä
745 7.940	48.00 mm	31.00 mm	79.00 mm	7.94 mm	7.94 mm	Pyynnöstä
745 4.370	32.00 mm	26.00 mm	58.00 mm	4.37 mm	4.37 mm	Pyynnöstä
745 3.570	27.00 mm	25.00 mm	52.00 mm	3.57 mm	3.57 mm	Pyynnöstä
745 10.720	60.00 mm	35.00 mm	95.00 mm	10.72 mm	10.72 mm	Pyynnöstä