Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844154339, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Tekniset tiedot

EAN: 4049844154339
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 F 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
6764 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Pyynnöstä
6764 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Pyynnöstä
6764 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Pyynnöstä
6764 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Pyynnöstä
6764 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Pyynnöstä
6764 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Pyynnöstä
6764 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Pyynnöstä
6764 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Pyynnöstä
6764 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Pyynnöstä