Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844100626, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: 3xD, Number of cutting edges range (from/to): 5, Type of machine interface: ~HB

Tekniset tiedot

EAN: 4049844100626
Type: N
Designation: Ratio end mill RF 100 SF
Helix angle: 45
Diameter range: 4.763 mm – 31.750 mm
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: 3xD
Type of machine interface: ~HB
Number of cutting edges range (from/to): 5

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
4264 6.350	38.00 mm	44.50 mm	82.50 mm	6.35 mm	6.35 mm	Pyynnöstä
4264 19.050	68.00 mm	51.60 mm	127.00 mm	19.05 mm	19.05 mm	Pyynnöstä
4264 7.940	44.00 mm	38.50 mm	82.50 mm	7.94 mm	7.94 mm	Pyynnöstä
4264 15.870	66.00 mm	48.40 mm	127.00 mm	15.88 mm	15.88 mm	Pyynnöstä
4264 31.750	118.50 mm	58.00 mm	190.50 mm	31.75 mm	31.75 mm	Pyynnöstä
4264 4.760	23.00 mm	40.50 mm	63.50 mm	4.76 mm	4.76 mm	Pyynnöstä
4264 11.110	58.00 mm	56.30 mm	114.30 mm	11.11 mm	11.11 mm	Pyynnöstä
4264 25.400	70.00 mm	58.00 mm	127.00 mm	25.40 mm	25.40 mm	Pyynnöstä
4264 12.700	59.00 mm	45.20 mm	114.30 mm	12.70 mm	12.70 mm	Pyynnöstä
4264 9.520	50.50 mm	51.10 mm	101.60 mm	9.53 mm	9.53 mm	Pyynnöstä