← Tuoteluettelo
Vie hiiri kuvan päälle suurentaaksesi
6776
Ratio end mill RF 100 SF
Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844202313, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 5, Type of machine interface: ~HB, Corner design: Schneidecke 90°
Tekniset tiedot
- EAN
- 4049844202313
- Type
- N
- Surface
- nanoA
- Designation
- Ratio end mill RF 100 SF
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 4.763 mm – 19.050 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 5
Mitat ja tilauskoodit
| Tilauskoodi | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Saatavuus | Pyydä hinta |
|---|---|---|---|---|---|---|---|
| 6776 7.940 | 26.64 mm | 36.86 mm | 63.50 mm | 7.94 mm | 7.94 mm | Pyynnöstä | |
| 6776 6.350 | 25.05 mm | 38.45 mm | 63.50 mm | 6.35 mm | 6.35 mm | Pyynnöstä | |
| 6776 15.870 | 40.75 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | Pyynnöstä | |
| 6776 9.520 | 31.40 mm | 32.10 mm | 63.50 mm | 9.53 mm | 9.53 mm | Pyynnöstä | |
| 6776 12.700 | 39.75 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | Pyynnöstä | |
| 6776 4.760 | 19.87 mm | 30.93 mm | 50.80 mm | 4.76 mm | 4.76 mm | Pyynnöstä | |
| 6776 19.050 | 49.10 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Pyynnöstä |