Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844491984, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38/40, Back rake angle: 12, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Tekniset tiedot

EAN: 4049844491984
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38/40
Diameter range: 4.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
6481 10.000	32.40 mm	40.00 mm	93.00 mm	10.00 mm	10.00 mm	Pyynnöstä
6481 5.000	18.25 mm	36.00 mm	65.00 mm	6.00 mm	5.00 mm	Pyynnöstä
6481 4.000	16.60 mm	36.00 mm	65.00 mm	6.00 mm	4.00 mm	Pyynnöstä
6481 8.000	26.20 mm	36.00 mm	80.00 mm	8.00 mm	8.00 mm	Pyynnöstä
6481 14.000	36.96 mm	45.00 mm	100.00 mm	14.00 mm	14.00 mm	Pyynnöstä
6481 6.000	22.90 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Pyynnöstä
6481 16.000	48.24 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	Pyynnöstä
6481 20.000	53.00 mm	50.00 mm	126.00 mm	20.00 mm	20.00 mm	Pyynnöstä
6481 12.000	35.68 mm	45.00 mm	100.00 mm	12.00 mm	12.00 mm	Pyynnöstä