Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492738, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 12, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling

Tekniset tiedot

EAN: 4049844492738
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.590 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HB
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
6484 25.400	54.61 mm	58.00 mm	114.30 mm	25.40 mm	25.40 mm	Pyynnöstä
6484 6.350	21.91 mm	35.00 mm	63.50 mm	6.35 mm	6.35 mm	Pyynnöstä
6484 3.170	11.75 mm	34.50 mm	50.80 mm	4.76 mm	3.17 mm	Pyynnöstä
6484 4.760	18.02 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	Pyynnöstä
6484 12.700	36.83 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Pyynnöstä
6484 7.940	24.21 mm	36.00 mm	63.50 mm	7.94 mm	7.94 mm	Pyynnöstä
6484 11.110	29.84 mm	37.20 mm	69.85 mm	11.11 mm	11.11 mm	Pyynnöstä
6484 15.870	44.45 mm	48.40 mm	95.25 mm	15.88 mm	15.88 mm	Pyynnöstä
6484 9.520	29.21 mm	36.00 mm	69.85 mm	9.53 mm	9.53 mm	Pyynnöstä
6484 19.050	48.90 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Pyynnöstä