Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093387125, Cutting material: M42, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°

Tekniset tiedot

EAN: 4031093387125
Type: N
Designation: Roughing/finishing end mills
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 6.000 mm – 36.000 mm
Back rake angle: 11
Cutting material: M42
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: B
Number of cutting edges range (from/to): 4-6

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
3698 16.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	Pyynnöstä
3698 28.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	28.00 mm	Pyynnöstä
3698 32.000	115.00 mm	60.00 mm	186.00 mm	32.00 mm	32.00 mm	Pyynnöstä
3698 20.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	Pyynnöstä
3698 10.000	49.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	Pyynnöstä
3698 18.000	68.00 mm	48.00 mm	123.00 mm	16.00 mm	18.00 mm	Pyynnöstä
3698 14.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	14.00 mm	Pyynnöstä
3698 12.000	58.00 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	Pyynnöstä
3698 8.000	42.00 mm	40.00 mm	88.00 mm	10.00 mm	8.00 mm	Pyynnöstä
3698 22.000	82.00 mm	50.00 mm	141.00 mm	20.00 mm	22.00 mm	Pyynnöstä
3698 6.000	27.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	Pyynnöstä
3698 25.000	99.00 mm	56.00 mm	166.00 mm	25.00 mm	25.00 mm	Pyynnöstä