Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093681407, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: short, Number of cutting edges range (from/to): 3, Type of machine interface: HA, Feed direction: with drilling

Tekniset tiedot

EAN: 4031093681407
Type: N
Designation: Slot drill GH 100 U (3-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HA
Number of cutting edges range (from/to): 3

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
5505 3.000	7.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Pyynnöstä
5505 7.000	15.00 mm	36.00 mm	58.00 mm	8.00 mm	7.00 mm	Pyynnöstä
5505 6.000	13.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Pyynnöstä
5505 8.000	16.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Pyynnöstä
5505 12.000	21.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Pyynnöstä
5505 10.000	19.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Pyynnöstä
5505 4.000	8.00 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Pyynnöstä
5505 18.000	30.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Pyynnöstä
5505 5.000	10.00 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Pyynnöstä
5505 20.000	34.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Pyynnöstä
5505 9.000	18.00 mm	40.00 mm	66.00 mm	10.00 mm	9.00 mm	Pyynnöstä
5505 16.000	27.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Pyynnöstä
5505 14.000	24.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Pyynnöstä