Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093685139, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Tekniset tiedot

EAN: 4031093685139
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 4.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
5735 8.000	24.36 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Pyynnöstä
5735 18.000	43.70 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Pyynnöstä
5735 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Pyynnöstä
5735 14.000	35.38 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Pyynnöstä
5735 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Pyynnöstä
5735 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Pyynnöstä
5735 10.000	28.70 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Pyynnöstä
5735 12.000	34.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Pyynnöstä
5735 6.000	17.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Pyynnöstä
5735 4.000	13.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Pyynnöstä
5735 25.000	61.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Pyynnöstä