Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4049844141100, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Tekniset tiedot

EAN: 4049844141100
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: short
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Mitat ja tilauskoodit

Tilauskoodi	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Saatavuus
6706 5.000	12.50 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Pyynnöstä
6706 8.000	17.36 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Pyynnöstä
6706 3.000	7.10 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Pyynnöstä
6706 6.000	14.20 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Pyynnöstä
6706 10.000	20.70 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Pyynnöstä
6706 12.000	24.04 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Pyynnöstä
6706 14.000	27.38 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Pyynnöstä
6706 20.000	39.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Pyynnöstä
6706 16.000	32.40 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Pyynnöstä
6706 18.000	35.70 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Pyynnöstä
6706 4.000	10.80 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Pyynnöstä