Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844496392, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 8, Length picto milling: long, Number of cutting edges range (from/to): 2, Feed direction: with drilling

Teknikikkut paasissutissat

EAN: 4049844496392
Type: N
Designation: Ball nose end mill G-Mold 55 B
Helix angle: 30
Diameter range: 0.500 mm – 12.000 mm
Feed direction: with drilling
Back rake angle: 8
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Length picto milling: long
Number of cutting edges range (from/to): 2

Uuttuutit pisiassanullu ilisarnaatit

Pisiassap normua	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Pigineqarnera
6844 4.000	8.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Apeqqutigineqarpat
6844 8.000	17.60 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Apeqqutigineqarpat
6844 10.000	22.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Apeqqutigineqarpat
6844 1.500	3.75 mm	34.10 mm	45.00 mm	4.00 mm	1.50 mm	Apeqqutigineqarpat
6844 6.000	13.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Apeqqutigineqarpat
6844 2.000	5.00 mm	40.30 mm	54.00 mm	6.00 mm	2.00 mm	Apeqqutigineqarpat
6844 0.800	2.00 mm	35.70 mm	45.00 mm	4.00 mm	0.80 mm	Apeqqutigineqarpat
6844 5.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Apeqqutigineqarpat
6844 3.000	7.50 mm	37.70 mm	54.00 mm	6.00 mm	3.00 mm	Apeqqutigineqarpat
6844 1.000	2.50 mm	35.30 mm	45.00 mm	4.00 mm	1.00 mm	Apeqqutigineqarpat
6844 12.000	26.40 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Apeqqutigineqarpat
6844 0.500	1.25 mm	35.90 mm	45.00 mm	4.00 mm	0.50 mm	Apeqqutigineqarpat