Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844496118, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 8, Length picto milling: extra long, Number of cutting edges range (from/to): 2, Feed direction: with drilling

Teknikikkut paasissutissat

EAN: 4049844496118
Type: N
Designation: Ball nose end mill G-Mold 55 B
Helix angle: 30
Diameter range: 0.500 mm – 10.000 mm
Feed direction: with drilling
Back rake angle: 8
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
Length picto milling: extra long
Number of cutting edges range (from/to): 2

Uuttuutit pisiassanullu ilisarnaatit

Pisiassap normua	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Pigineqarnera
6846 10.000	22.00 mm	45.00 mm	120.00 mm	12.00 mm	10.00 mm	Apeqqutigineqarpat
6846 3.000	7.50 mm	38.10 mm	80.00 mm	6.00 mm	3.00 mm	Apeqqutigineqarpat
6846 8.000	17.60 mm	40.00 mm	100.00 mm	10.00 mm	8.00 mm	Apeqqutigineqarpat
6846 6.000	13.20 mm	36.00 mm	90.00 mm	8.00 mm	6.00 mm	Apeqqutigineqarpat
6846 1.500	3.75 mm	31.10 mm	63.00 mm	4.00 mm	1.50 mm	Apeqqutigineqarpat
6846 1.000	2.50 mm	39.20 mm	63.00 mm	4.00 mm	1.00 mm	Apeqqutigineqarpat
6846 2.000	5.00 mm	36.30 mm	80.00 mm	6.00 mm	2.00 mm	Apeqqutigineqarpat
6846 5.000	11.00 mm	36.00 mm	90.00 mm	8.00 mm	5.00 mm	Apeqqutigineqarpat
6846 0.800	2.00 mm	29.50 mm	50.00 mm	4.00 mm	0.80 mm	Apeqqutigineqarpat
6846 0.500	1.25 mm	34.30 mm	50.00 mm	4.00 mm	0.50 mm	Apeqqutigineqarpat
6846 4.000	8.80 mm	36.00 mm	80.00 mm	6.00 mm	4.00 mm	Apeqqutigineqarpat