← Nioqqutit allattorsimaffiat
Assiliaq annertusiniarlugu qulaaniitinneqaruk
3715
Hard multi-tooth end mill GH 100 H
Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA
Teknikikkut paasissutissat
- EAN
- 4031093674614
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill GH 100 H
- Helix angle
- 55
- Diameter range
- 3.000 mm – 20.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6-8
Uuttuutit pisiassanullu ilisarnaatit
| Pisiassap normua | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Pigineqarnera | Akia apeqqutigiuk |
|---|---|---|---|---|---|---|---|
| 3715 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Apeqqutigineqarpat | |
| 3715 18.001 | 46.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 18.00 mm | Apeqqutigineqarpat | |
| 3715 14.000 | 32.00 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Apeqqutigineqarpat | |
| 3715 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Apeqqutigineqarpat | |
| 3715 18.000 | 40.00 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | Apeqqutigineqarpat | |
| 3715 4.000 | 14.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Apeqqutigineqarpat | |
| 3715 3.000 | 10.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Apeqqutigineqarpat | |
| 3715 14.001 | 38.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 14.00 mm | Apeqqutigineqarpat | |
| 3715 20.000 | 46.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Apeqqutigineqarpat | |
| 3715 5.000 | 16.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Apeqqutigineqarpat | |
| 3715 12.000 | 32.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Apeqqutigineqarpat | |
| 3715 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Apeqqutigineqarpat | |
| 3715 16.000 | 39.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Apeqqutigineqarpat |