← Nioqqutit allattorsimaffiat
Assiliaq annertusiniarlugu qulaaniitinneqaruk
19951
HPC end mills (4-fluted)
HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394537, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Corner design: Schneidecke 90°, Feed direction: with drilling
Teknikikkut paasissutissat
- EAN
- 4049844394537
- Type
- N
- Surface
- AlCrN
- Designation
- HPC end mills (4-fluted)
- Helix angle
- 35/38
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- medium
- Type of machine interface
- ~HA
- Number of cutting edges range (from/to)
- 4
Uuttuutit pisiassanullu ilisarnaatit
| Pisiassap normua | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Pigineqarnera | Akia apeqqutigiuk |
|---|---|---|---|---|---|---|---|
| 19951 14.000 | 62.00 mm | 38.00 mm | 100.00 mm | 14.00 mm | 14.00 mm | Apeqqutigineqarpat | |
| 19951 10.000 | 56.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Apeqqutigineqarpat | |
| 19951 12.000 | 61.00 mm | 39.00 mm | 100.00 mm | 12.00 mm | 12.00 mm | Apeqqutigineqarpat | |
| 19951 3.000 | 18.50 mm | 37.00 mm | 60.00 mm | 4.00 mm | 3.00 mm | Apeqqutigineqarpat | |
| 19951 20.000 | 87.00 mm | 50.00 mm | 141.00 mm | 20.00 mm | 20.00 mm | Apeqqutigineqarpat | |
| 19951 16.000 | 73.00 mm | 48.00 mm | 125.00 mm | 16.00 mm | 16.00 mm | Apeqqutigineqarpat | |
| 19951 4.000 | 23.00 mm | 37.00 mm | 60.00 mm | 4.00 mm | 4.00 mm | Apeqqutigineqarpat | |
| 19951 8.000 | 43.00 mm | 36.00 mm | 88.00 mm | 8.00 mm | 8.00 mm | Apeqqutigineqarpat | |
| 19951 6.000 | 29.00 mm | 36.00 mm | 68.00 mm | 6.00 mm | 6.00 mm | Apeqqutigineqarpat | |
| 19951 5.000 | 27.50 mm | 37.00 mm | 68.00 mm | 6.00 mm | 5.00 mm | Apeqqutigineqarpat |