Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844099470, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HA/~HB, Feed direction: with drilling

Teknikikkut paasissutissat

EAN: 4049844099470
Type: W
Surface: bright
Designation: Ratio end mill RF 100 AL
Helix angle: 39/40/41
Diameter range: 3.175 mm – 25.400 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 3

Uuttuutit pisiassanullu ilisarnaatit

Pisiassap normua	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Pigineqarnera
4265 12.700	42.00 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Apeqqutigineqarpat
4265 7.940	27.50 mm	36.00 mm	63.50 mm	7.94 mm	7.94 mm	Apeqqutigineqarpat
4265 11.110	34.50 mm	35.30 mm	69.80 mm	11.11 mm	11.11 mm	Apeqqutigineqarpat
4265 4.760	20.00 mm	30.80 mm	50.80 mm	4.76 mm	4.76 mm	Apeqqutigineqarpat
4265 25.400	54.00 mm	58.00 mm	101.60 mm	25.40 mm	25.40 mm	Apeqqutigineqarpat
4265 6.350	26.00 mm	37.50 mm	63.50 mm	6.35 mm	6.35 mm	Apeqqutigineqarpat
4265 9.520	33.50 mm	30.00 mm	63.50 mm	9.53 mm	9.53 mm	Apeqqutigineqarpat
4265 3.170	15.50 mm	35.30 mm	50.80 mm	3.17 mm	3.17 mm	Apeqqutigineqarpat
4265 15.870	43.00 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	Apeqqutigineqarpat
4265 19.050	52.00 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Apeqqutigineqarpat