Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844099579, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 5, Type of machine interface: ~HB, Feed direction: with drilling

Teknikikkut paasissutissat

EAN: 4049844099579
Type: N
Designation: Ratio end mill RF 100 SF
Helix angle: 45
Diameter range: 4.763 mm – 31.750 mm
Feed direction: with drilling
Back rake angle: 7
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HB
Number of cutting edges range (from/to): 5

Uuttuutit pisiassanullu ilisarnaatit

Pisiassap normua	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Pigineqarnera
4263 15.870	41.00 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	Apeqqutigineqarpat
4263 7.940	26.50 mm	37.00 mm	63.50 mm	7.94 mm	7.94 mm	Apeqqutigineqarpat
4263 11.110	32.50 mm	37.30 mm	69.80 mm	11.11 mm	11.11 mm	Apeqqutigineqarpat
4263 6.350	25.00 mm	38.50 mm	63.50 mm	6.35 mm	6.35 mm	Apeqqutigineqarpat
4263 4.760	20.00 mm	30.80 mm	50.80 mm	4.76 mm	4.76 mm	Apeqqutigineqarpat
4263 19.050	49.00 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Apeqqutigineqarpat
4263 12.700	40.00 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Apeqqutigineqarpat
4263 25.400	51.00 mm	58.00 mm	101.60 mm	25.40 mm	25.40 mm	Apeqqutigineqarpat
4263 31.750	80.50 mm	58.00 mm	152.40 mm	31.75 mm	31.75 mm	Apeqqutigineqarpat
4263 9.520	31.50 mm	32.00 mm	63.50 mm	9.53 mm	9.53 mm	Apeqqutigineqarpat