← Nioqqutit allattorsimaffiat
Assiliaq annertusiniarlugu qulaaniitinneqaruk
3342
Roughing/finishing end mills
Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093377232, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°
Teknikikkut paasissutissat
- EAN
- 4031093377232
- Type
- N
- Surface
- bright
- Designation
- Roughing/finishing end mills
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 6.000 mm – 36.000 mm
- Back rake angle
- 11
- Cutting material
- M42
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4-6
Uuttuutit pisiassanullu ilisarnaatit
| Pisiassap normua | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Pigineqarnera | Akia apeqqutigiuk |
|---|---|---|---|---|---|---|---|
| 3342 20.000 | 82.00 mm | 50.00 mm | 141.00 mm | 20.00 mm | 20.00 mm | Apeqqutigineqarpat | |
| 3342 8.000 | 42.00 mm | 40.00 mm | 88.00 mm | 10.00 mm | 8.00 mm | Apeqqutigineqarpat | |
| 3342 28.000 | 99.00 mm | 56.00 mm | 166.00 mm | 25.00 mm | 28.00 mm | Apeqqutigineqarpat | |
| 3342 14.000 | 58.00 mm | 45.00 mm | 110.00 mm | 12.00 mm | 14.00 mm | Apeqqutigineqarpat | |
| 3342 32.000 | 115.00 mm | 60.00 mm | 186.00 mm | 32.00 mm | 32.00 mm | Apeqqutigineqarpat | |
| 3342 10.000 | 49.00 mm | 40.00 mm | 95.00 mm | 10.00 mm | 10.00 mm | Apeqqutigineqarpat | |
| 3342 22.000 | 82.00 mm | 50.00 mm | 141.00 mm | 20.00 mm | 22.00 mm | Apeqqutigineqarpat | |
| 3342 18.000 | 68.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 18.00 mm | Apeqqutigineqarpat | |
| 3342 16.000 | 68.00 mm | 48.00 mm | 123.00 mm | 16.00 mm | 16.00 mm | Apeqqutigineqarpat | |
| 3342 12.000 | 58.00 mm | 45.00 mm | 110.00 mm | 12.00 mm | 12.00 mm | Apeqqutigineqarpat | |
| 3342 6.000 | 27.00 mm | 36.00 mm | 68.00 mm | 6.00 mm | 6.00 mm | Apeqqutigineqarpat | |
| 3342 25.000 | 99.00 mm | 56.00 mm | 166.00 mm | 25.00 mm | 25.00 mm | Apeqqutigineqarpat |