HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394681, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Infotmasion tekniku

EAN: 4049844394681
Type: N
Surface: AlCrN
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA
Number of cutting edges range (from/to): 4

Medida yan kodigun otden

Kodigun otden	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Guinaha
19950 5.000	16.50 mm	32.00 mm	50.00 mm	5.00 mm	5.00 mm	Gi ginagao
19950 16.000	40.00 mm	36.00 mm	75.00 mm	16.00 mm	16.00 mm	Gi ginagao
19950 10.000	33.00 mm	36.00 mm	70.00 mm	10.00 mm	10.00 mm	Gi ginagao
19950 8.000	25.00 mm	31.00 mm	60.00 mm	8.00 mm	8.00 mm	Gi ginagao
19950 3.000	10.50 mm	36.00 mm	50.00 mm	4.00 mm	3.00 mm	Gi ginagao
19950 14.000	39.00 mm	36.00 mm	75.00 mm	14.00 mm	14.00 mm	Gi ginagao
19950 4.000	14.00 mm	32.00 mm	50.00 mm	4.00 mm	4.00 mm	Gi ginagao
19950 20.000	52.00 mm	46.00 mm	100.00 mm	20.00 mm	20.00 mm	Gi ginagao
19950 12.000	38.00 mm	36.00 mm	75.00 mm	12.00 mm	12.00 mm	Gi ginagao
19950 6.000	20.00 mm	30.00 mm	50.00 mm	6.00 mm	6.00 mm	Gi ginagao