Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844154339, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Infotmasion tekniku

EAN: 4049844154339
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 F 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Medida yan kodigun otden

Kodigun otden	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Guinaha
6764 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Gi ginagao
6764 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Gi ginagao
6764 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Gi ginagao
6764 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Gi ginagao
6764 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Gi ginagao
6764 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Gi ginagao
6764 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Gi ginagao
6764 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Gi ginagao
6764 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Gi ginagao