← Katalog
Prijeđite mišem preko slike za uvećanje
25112
Cutting insert for back boring and profiling
Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844183483, Cutting material: Solid carbide, Surface: bright
Tehničke specifikacije
- EAN
- 4049844183483
- Surface
- bright
- Designation
- Cutting insert for back boring and profiling
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Total length | Shank diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|
| 25112 4.001 | 25.00 mm | 4.00 mm | Na upit | |
| 25112 4.006 | 30.00 mm | 4.00 mm | Na upit | |
| 25112 4.022 | 50.00 mm | 4.00 mm | Na upit | |
| 25112 4.003 | 30.00 mm | 4.00 mm | Na upit | |
| 25112 4.008 | 40.00 mm | 4.00 mm | Na upit | |
| 25112 4.014 | 35.00 mm | 4.00 mm | Na upit | |
| 25112 4.020 | 40.00 mm | 4.00 mm | Na upit | |
| 25112 4.005 | 25.00 mm | 4.00 mm | Na upit | |
| 25112 4.011 | 35.00 mm | 4.00 mm | Na upit | |
| 25112 4.016 | 45.00 mm | 4.00 mm | Na upit | |
| 25112 4.009 | 25.00 mm | 4.00 mm | Na upit | |
| 25112 4.021 | 45.00 mm | 4.00 mm | Na upit | |
| 25112 4.019 | 35.00 mm | 4.00 mm | Na upit | |
| 25112 4.007 | 35.00 mm | 4.00 mm | Na upit | |
| 25112 4.004 | 35.00 mm | 4.00 mm | Na upit | |
| 25112 4.017 | 50.00 mm | 4.00 mm | Na upit | |
| 25112 4.002 | 25.00 mm | 4.00 mm | Na upit | |
| 25112 4.013 | 30.00 mm | 4.00 mm | Na upit | |
| 25112 4.012 | 40.00 mm | 4.00 mm | Na upit | |
| 25112 4.010 | 30.00 mm | 4.00 mm | Na upit | |
| 25112 4.018 | 30.00 mm | 4.00 mm | Na upit | |
| 25112 4.015 | 40.00 mm | 4.00 mm | Na upit |