← Katalog
Prijeđite mišem preko slike za uvećanje
3155
End mill XL (4-fluted)
End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093664110, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4-6, Corner design: Schneidecke 90°
Tehničke specifikacije
- EAN
- 4031093664110
- Type
- N
- Designation
- End mill XL (4-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 4.763 mm – 25.400 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Number of cutting edges range (from/to)
- 4-6
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 3155 25.400 | 98.35 mm | 54.05 mm | 152.40 mm | 25.40 mm | 25.40 mm | Na upit | |
| 3155 9.520 | 50.52 mm | 51.08 mm | 101.60 mm | 9.53 mm | 9.53 mm | Na upit | |
| 3155 7.940 | 48.94 mm | 52.66 mm | 101.60 mm | 7.94 mm | 7.94 mm | Na upit | |
| 3155 15.870 | 90.61 mm | 61.80 mm | 152.40 mm | 15.88 mm | 15.88 mm | Na upit | |
| 3155 19.050 | 93.53 mm | 58.87 mm | 152.40 mm | 19.05 mm | 19.05 mm | Na upit | |
| 3155 4.760 | 36.76 mm | 39.44 mm | 76.20 mm | 4.76 mm | 4.76 mm | Na upit | |
| 3155 6.350 | 47.35 mm | 54.25 mm | 101.60 mm | 6.35 mm | 6.35 mm | Na upit | |
| 3155 12.700 | 87.68 mm | 64.72 mm | 152.40 mm | 12.70 mm | 12.70 mm | Na upit | |
| 3155 11.110 | 61.22 mm | 65.78 mm | 127.00 mm | 11.11 mm | 11.11 mm | Na upit |