← Katalog
Prijeđite mišem preko slike za uvećanje
4270
Hard multi-tooth end mill corner radius GH 100 H
Hard multi-tooth end mill corner radius GH 100 H. Designation: Hard multi-tooth end mill corner radius GH 100 H, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844151932, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6, Type of machine interface: HA
Tehničke specifikacije
- EAN
- 4049844151932
- Type
- H
- Surface
- Signum
- Designation
- Hard multi-tooth end mill corner radius GH 100 H
- Helix angle
- 55
- Diameter range
- 3.000 mm – 16.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 4270 6.005 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Na upit | |
| 4270 8.005 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Na upit | |
| 4270 16.020 | 39.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na upit | |
| 4270 6.010 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Na upit | |
| 4270 12.005 | 32.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 4270 3.003 | 10.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Na upit | |
| 4270 4.004 | 14.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Na upit | |
| 4270 12.015 | 32.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 4270 10.015 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 4270 8.015 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Na upit | |
| 4270 12.010 | 32.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 4270 8.010 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Na upit | |
| 4270 10.005 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 4270 5.005 | 16.50 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Na upit | |
| 4270 10.010 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 4270 16.010 | 39.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na upit |