← Katalog
Prijeđite mišem preko slike za uvećanje
3077
Ratio end mill RF 100 AL
Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844007178, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HA/~HB, Feed direction: with drilling
Tehničke specifikacije
- EAN
- 4049844007178
- Type
- W
- Surface
- bright
- Designation
- Ratio end mill RF 100 AL
- Helix angle
- 40/42
- Diameter range
- 4.763 mm – 19.050 mm
- Feed direction
- with drilling
- Product family
- RF 100 A
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"partial"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HA/~HB
- Number of cutting edges range (from/to)
- 4
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 3077 9.520 | 31.50 mm | 32.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | Na upit | |
| 3077 4.760 | 19.50 mm | 31.30 mm | 50.80 mm | 4.76 mm | 4.76 mm | Na upit | |
| 3077 15.870 | 42.00 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | Na upit | |
| 3077 12.700 | 41.00 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | Na upit | |
| 3077 19.050 | 50.00 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Na upit | |
| 3077 7.940 | 25.50 mm | 38.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Na upit | |
| 3077 6.350 | 24.00 mm | 39.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | Na upit |