← Katalog
Prijeđite mišem preko slike za uvećanje
3660
Roughing end mill GS 40 (fine teeth)
Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093385190, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 4-6, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: with drilling
Tehničke specifikacije
- EAN
- 4031093385190
- Type
- N
- Designation
- Roughing end mill GS 40 (fine teeth)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 6.000 mm – 32.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 4-6
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 3660 18.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 18.00 mm | Na upit | |
| 3660 20.000 | 45.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Na upit | |
| 3660 8.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 8.00 mm | Na upit | |
| 3660 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na upit | |
| 3660 14.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 14.00 mm | Na upit | |
| 3660 11.000 | 27.00 mm | 45.00 mm | 79.00 mm | 12.00 mm | 11.00 mm | Na upit | |
| 3660 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 3660 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 3660 13.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 13.00 mm | Na upit | |
| 3660 15.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 15.00 mm | Na upit | |
| 3660 32.000 | 62.00 mm | 60.00 mm | 133.00 mm | 32.00 mm | 32.00 mm | Na upit | |
| 3660 9.000 | 23.00 mm | 40.00 mm | 69.00 mm | 10.00 mm | 9.00 mm | Na upit | |
| 3660 28.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 28.00 mm | Na upit | |
| 3660 30.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 30.00 mm | Na upit | |
| 3660 6.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Na upit | |
| 3660 7.000 | 20.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 7.00 mm | Na upit | |
| 3660 25.000 | 54.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Na upit |