← Katalog
Prijeđite mišem preko slike za uvećanje
5546
Slot drill GH 100 U (3-fluted)
Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093641449, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: HB, Feed direction: with drilling
Tehničke specifikacije
- EAN
- 4031093641449
- Type
- N
- Designation
- Slot drill GH 100 U (3-fluted)
- Helix angle
- 45
- Diameter range
- 3.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 3
Dimenzije i šifre za narudžbu
| Šifra narudžbe | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnost | Zatražite cijenu |
|---|---|---|---|---|---|---|---|
| 5546 10.000 | 27.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Na upit | |
| 5546 7.000 | 20.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 7.00 mm | Na upit | |
| 5546 6.000 | 16.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Na upit | |
| 5546 3.000 | 10.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Na upit | |
| 5546 14.000 | 32.00 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Na upit | |
| 5546 16.000 | 37.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Na upit | |
| 5546 20.000 | 46.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Na upit | |
| 5546 12.000 | 31.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Na upit | |
| 5546 18.000 | 38.00 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | Na upit | |
| 5546 4.500 | 12.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.50 mm | Na upit | |
| 5546 3.500 | 10.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.50 mm | Na upit | |
| 5546 5.000 | 14.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Na upit | |
| 5546 4.000 | 11.00 mm | 57.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Na upit | |
| 5546 8.000 | 23.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Na upit | |
| 5546 9.000 | 24.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 9.00 mm | Na upit |