← Katalog
Arahkan kursor ke gambar untuk memperbesar
539
Morse taper shank subland drill
Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093162401, Cutting material: HSS, Surface: steam tempered, Type: N, Standard: DIN 8377, Point angle: 118, Tolerance class nominal diameter: h8, Cutting direction: Right-hand, Type of machine interface: MK
Spesifikasi teknis
- EAN
- 4031093162401
- Type
- N
- Surface
- steam tempered
- Standard
- DIN 8377
- Designation
- Morse taper shank subland drill
- Point angle
- 118
- Diameter range
- 10.000 mm – 33.000 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Type of machine interface
- MK
- Tolerance class nominal diameter
- h8
Dimensi dan kode pesanan
| Kode pesanan | Flute length | Total length | Nominal diameter | Ketersediaan | Minta harga |
|---|---|---|---|---|---|
| 539 18.000 | 130.00 mm | 228.00 mm | 18.00 mm | Berdasarkan permintaan | |
| 539 26.000 | 165.00 mm | 286.00 mm | 26.00 mm | Berdasarkan permintaan | |
| 539 33.000 | 185.00 mm | 334.00 mm | 33.00 mm | Berdasarkan permintaan | |
| 539 15.000 | 114.00 mm | 212.00 mm | 15.00 mm | Berdasarkan permintaan | |
| 539 10.000 | 87.00 mm | 168.00 mm | 10.00 mm | Berdasarkan permintaan | |
| 539 20.000 | 140.00 mm | 238.00 mm | 20.00 mm | Berdasarkan permintaan | |
| 539 30.000 | 175.00 mm | 296.00 mm | 30.00 mm | Berdasarkan permintaan | |
| 539 24.000 | 160.00 mm | 281.00 mm | 24.00 mm | Berdasarkan permintaan | |
| 539 11.000 | 94.00 mm | 175.00 mm | 11.00 mm | Berdasarkan permintaan |