← Katalog
Arahkan kursor ke gambar untuk memperbesar
3078
Ratio end mill RF 100 F
Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844007109, Cutting material: Solid carbide, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling
Spesifikasi teknis
- EAN
- 4049844007109
- Type
- N
- Designation
- Ratio end mill RF 100 F
- Helix angle
- 40/42
- Diameter range
- 4.763 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- ~HB
- Number of cutting edges range (from/to)
- 4
Dimensi dan kode pesanan
| Kode pesanan | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Ketersediaan | Minta harga |
|---|---|---|---|---|---|---|---|
| 3078 9.520 | 31.50 mm | 32.00 mm | 63.50 mm | 9.53 mm | 9.53 mm | Berdasarkan permintaan | |
| 3078 4.760 | 19.50 mm | 31.30 mm | 50.80 mm | 4.76 mm | 4.76 mm | Berdasarkan permintaan | |
| 3078 12.700 | 41.00 mm | 45.20 mm | 88.90 mm | 12.70 mm | 12.70 mm | Berdasarkan permintaan | |
| 3078 19.050 | 50.00 mm | 51.60 mm | 101.60 mm | 19.05 mm | 19.05 mm | Berdasarkan permintaan | |
| 3078 6.350 | 24.00 mm | 39.50 mm | 63.50 mm | 6.35 mm | 6.35 mm | Berdasarkan permintaan | |
| 3078 15.870 | 42.00 mm | 48.40 mm | 88.90 mm | 15.88 mm | 15.88 mm | Berdasarkan permintaan | |
| 3078 7.940 | 25.50 mm | 38.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Berdasarkan permintaan |