Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844242500, Cutting material: Solid carbide, Surface: nanoA

Technical specifications

EAN: 4049844242500
Surface: nanoA
Designation: Cutting insert for boring out and profiling
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]

Dimensions and order codes

Order code	Total length	Shank diameter	Availability
25710 6.037	37.00 mm	6.00 mm	On request
25710 6.032	57.00 mm	6.00 mm	On request
25710 6.003	62.00 mm	6.00 mm	On request
25710 6.030	47.00 mm	6.00 mm	On request
25710 6.020	42.00 mm	6.00 mm	On request
25710 6.038	42.00 mm	6.00 mm	On request
25710 6.012	77.00 mm	6.00 mm	On request
25710 6.019	37.00 mm	6.00 mm	On request
25710 6.024	62.00 mm	6.00 mm	On request
25710 6.025	67.00 mm	6.00 mm	On request
25710 6.028	37.00 mm	6.00 mm	On request
25710 6.001	52.00 mm	6.00 mm	On request
25710 6.017	42.00 mm	6.00 mm	On request
25710 6.042	62.00 mm	6.00 mm	On request
25710 6.036	77.00 mm	6.00 mm	On request
25710 6.009	62.00 mm	6.00 mm	On request
25710 6.035	72.00 mm	6.00 mm	On request
25710 6.040	52.00 mm	6.00 mm	On request
25710 6.045	77.00 mm	6.00 mm	On request
25710 6.011	72.00 mm	6.00 mm	On request
25710 6.010	67.00 mm	6.00 mm	On request
25710 6.002	57.00 mm	6.00 mm	On request
25710 6.044	72.00 mm	6.00 mm	On request
25710 6.013	37.00 mm	6.00 mm	On request
25710 6.022	52.00 mm	6.00 mm	On request
25710 6.034	67.00 mm	6.00 mm	On request
25710 6.023	57.00 mm	6.00 mm	On request
25710 6.006	77.00 mm	6.00 mm	On request
25710 6.033	62.00 mm	6.00 mm	On request
25710 6.018	47.00 mm	6.00 mm	On request
25710 6.041	57.00 mm	6.00 mm	On request
25710 6.029	42.00 mm	6.00 mm	On request
25710 6.021	47.00 mm	6.00 mm	On request
25710 6.026	72.00 mm	6.00 mm	On request
25710 6.005	72.00 mm	6.00 mm	On request
25710 6.027	77.00 mm	6.00 mm	On request
25710 6.016	37.00 mm	6.00 mm	On request
25710 6.031	52.00 mm	6.00 mm	On request
25710 6.008	57.00 mm	6.00 mm	On request
25710 6.007	52.00 mm	6.00 mm	On request
25710 6.043	67.00 mm	6.00 mm	On request
25710 6.014	42.00 mm	6.00 mm	On request
25710 6.004	67.00 mm	6.00 mm	On request
25710 6.015	47.00 mm	6.00 mm	On request
25710 6.039	47.00 mm	6.00 mm	On request