Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

المواصفات الفنية

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

الأبعاد ورموز الطلب

رمز الطلب	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	التوفر
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	عند الطلب
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	عند الطلب
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	عند الطلب
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	عند الطلب
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	عند الطلب
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	عند الطلب
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	عند الطلب
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	عند الطلب
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	عند الطلب
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	عند الطلب
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	عند الطلب
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	عند الطلب
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	عند الطلب